Dry Wall High Yield

TYTAN PRO Drywall High Yield Adhesive’s innovative formula replaces up to 14 traditional 28oz cartridges while providing superior insulation and acoustic dampening properties. Its high yield formula reduces canister changes and overall installation time. You won’t only save time and money, but the TYTAN PRO Applicator will also reduce the strain that leads to painful health issues like carpal tunnel compared to traditional adhesive applicators. It eliminates nail pops and fills small gaps and cracks better than traditional adhesives so you will have a tight secure seal. It cures at a similar rate compared to traditional adhesives and should be used in conjunction with mechanical fasteners. It adheres to most construction materials including: drywall, vinyl-faced wallboard, masonry, lumber, cork, steel studs, and other wood materials.

Sub Floor High Yield

TYTAN Subfloor High Yield Adhesive is an innovative high-yield Subfloor adhesive that replaces up to 12 traditional 28oz cartridges while meeting ASTM D3498 & APA-AFG-01. TYTAN reduces labor time and product cost in half and while offering similar application specifications. It fills small gaps and cracks better than traditional adhesives since it collapses into a gel adhesive and then expands after the substrate is applied to help provide a tight seal, level floor, and protect against squeaks. It may even be used on frozen lumber when the air temperature is within the recommended range. It cures at a similar rate compared to traditional adhesives and should be used in conjunction with mechanical fasteners. Applications include: joists, subflooring, trusses, and decks. It provides a strong bond to lumber, plywood, concrete, metals, masonry and others substrates

Foam Cleaner

TYTAN Foam Cleaner may be used to remove any unwanted uncured polyurethane foam. It may be attached to most gun dispensers. The attached spray nozzle may be used to remove external uncured foam from dispensing guns to extend the life of the tool. The cleaner may be used on most construction materials or even fabric but it may cause discoloring or leave a residue. It is not harmful to skin in small quantities but it should only be seen as a last resort if gloves are not used.